How do you know which suspension you have?

If you have air bags, you have a TASS Generation 1 or 2 suspension. If you have a Horizon, and you do not have air suspension, you have a Torsion axle. For more in depth information read the Suspension Article here.

FULL TASS SUSPENSION UPGRADE:
This upgrade reduces the amount of body roll the trailer experiences by limiting the movement using bump stops and limiting straps. It's very effective and immediately noticeable once you have them fitted.

In conjunction with the bump stops and limiting straps we recommend a retrofitting custom valved Fox 2.0 race shocks. These shock absorbers improve the rebound and dampening compression. A bolt in cross member changes the shock position to a steeper more optimum angle.

FULL UPGRADE FOR HORIZON TRAILERS:

Fitted at the AT Facility: Cost: $1122.00

Home install Kit form: Cost: $765.58
(involves welding the limit stop tabs to the trailing arm).

FULL UPGRADE FOR CHASER TRAILERS:

This process is more involved. The existing chassis cross member has to be removed to allow for the placement of the new bolt in cross member. We only do this conversion "in house".

Full Chaser Upgrade: Cost: $1407.00

BASIC TASS Suspension Upgrade:
This upgrade reduces the amount of body roll the trailer experiences by limiting the movement using bump stops and limiting straps. It's very effective and immediately noticeable once you have them fitted.

BASIC UPGRADE FOR CHASER & HORIZON TRAILERS:
Including bump stops, limiting straps and tabs.

Fitted by AT: Cost: $288.00

Home install Kit form: Cost: $98.00
(involves welding the limit stop tabs to the trailing arm).

TORSION FLEX AXLES:
There are no simple solutions to improve the performance of this axle. The axle and brackets must be removed and a new suspension system installed. We use our adjustable trailing arm suspension, and offer you the choice of air/over shocks, or coil/over shocks.

All of our Torsion Flex axle replacements are done at our facility in Upland, CA. Air suspension replacement starts out around $2000.00. Call us to discuss the details.

We use the same stainless steel awning brackets we have used for years on the Horizon trailer, and add additional hardware to mount them to the ouside corners of the trailer.

To gain the height needed for head clearance we designed a double extension upright.

You have a choice of awnings, either the Fiamma F35 Pro (72” x 72”), the same one we use on the Horizon, or the Eezi Awn 2000 series 2.0 M awning (78” x 83”).
See www.adventuretrailers.com/awning.html

We’d be more than happy to schedule an appointment for you at our production facility to fit the awning, or we can send you a full kit that you can install yourself using hand tools.

Installed cost:
Utilizing the Fiamma Awning    $   839.00
Utilizing the Eezi Awn Awning $ 1057.00

Kit Cost:
Utilizing the Fiamma Awning    $ 733.00
Utilizing the Eezi Awn Awning $ 952.00

If you are running air suspension, or need a compressor to air up your tires, we have a line of Extreme Aire compressors.

The line starts out with the small but powerful Atom air, and goes all the way up to the fan cooled Extreme Aire compressor. We can set you up with the ideal compressor for your needs.

While you check out the compressors at www.adventuretrailers.com/tirerepair.html have a look at the tire repair tools and puncture repair kits.

Atom Aire 12 Volt Compressor (picture to left). The perfect compressor for your trailer, ARB or pneumatic locking differential compressor. Can be mounted in any position or angle.

- 10 amp motor
- .9 CFM free flow
- 150 psi max working pressure

Cost: $ 89.95

By replacing a regular hitch pin with a locking Silent Hitch Pin all the noise and movement can be gone.

Stop the ovaling of the hole the hitch pin fits into by removing unwanted movement with a Silent Hitch Pin.

Cost: $28.69

This second generation LED work lights are impressive. They are a very bright LED work light, 3000 candle power. The light is encased in a heavy duty aluminum housing. An industrial quality fitting.

Read about the specs. on them at www.adventuretrailers.com/12volt_solar.html

Cost: $120.00

Located beneath the water pump and next to the kitchen it's obscenely civilized.

Stainless Steel Sink: Cost: $275.00
(Includes all mounting hardware).

The shelf is made from 1/2" Baltic Birch, the edges are routered and the corners rounded, it is finished with polyurethane. The shelf locks in place between the fender and the flare of the box, with the help of two location pins.
20" W X 50"L X 1/2"D.

Cost: $80.00

If you're up in your roof top tent, and moving around, the trailer The trailer is going to start moving beneath you. The stabilizer will solidify the trailer and stop you from feeling sea sick!

The stabilizer will also support the rear of the trailer when it's disconnected from the tow vehicle. A valuable safety device if you've got kids who like to climb all over the trailer.

This device slips under the rear of the trailer. After ratcheting the trapezoid into position the rear of the trailer is stabilized. An excellent safety device for use when the trailer is unhitched from the tow vehicle.

Cost: $79.00

Cost: $85.00

(We also do custom inlayed cutting boards for the tailgate).